156-915.80 Practice Test Questions Dumps | Guaranteed Success
[May /2018] 156-915.80 Practice Test Questions Dumps | Guaranteed Success
New Updated 156-915.80 Exam Questions from Dumpsout 156-915.80 PDF dumps! Welcome to download the newest Dumpsout 156-915.80 VCE dumps: https://www.dumpsout.com/156-915.80-dumps.html
Keywords: 156-915.80 exam dumps, 156-915.80 exam questions, 156-915.80 VCE , 156-915.80 VCE Dumps, 156-915.80 PDF dumps, 156-915.80 PDF Dumps Questions, 156-915.80 questions answers, 156-915.80 practice test, 156-915.80 study guide, 156-915.80 braindumps, 156-915.80 exam braindumps– 156-915.80 - Check Point Certified Security Expert Update - R80.10 Exam
P.S. Free 156-915.80 VCE dumps download from direct PDF Link: https://www.dumpsout.com/top/demo/Checkpoint-156-915.80.pdf
QUESTION NO: 1
Which command collects diagnostic data for analyzing customer setup remotely?
A. cpinfo
B. migrate export
C. sysinfo
D. cpview
Answer: A
CPInfo is an auto-updatable utility that collects diagnostics data on a customer's machine at the time of execution and uploads it to Check Point servers (it replaces the standalone cp_uploader utility for uploading files to Check Point servers).
The CPInfo output file allows analyzing customer setups from a remote location. Check Point support
engineers can open the CPInfo file in a demo mode, while viewing actual customer Security Policies and
Objects. This allows the in-depth analysis of customer's configuration and environment settings.
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk92739
QUESTION NO: 2
When deploying multiple clustered firewalls on the same subnet, what does the firewall administrator need to configure to prevent CCP broadcasts being sent to the wrong cluster?
A. Set the fwha_mac_magic_forward parameter in the $CPDIR/boot/modules/ha_boot. conf
B. Set the fwha_mac_magic parameter in the $FWDIR/boot/fwkern.conf file
C. Set the cluster global ID using the command “cphaconf cluster_id set <value>”
D. Set the cluster global ID using the command “fw ctt set cluster_id <value>”
Answer: C
Reference: https://supportcenter.checkpoint.com/supportcenter/portal? eventSubmit_doGoviewsolutiondetails=&solutionid=sk25977
QUESTION NO: 3
Which of these options is an implicit MEP option?
A. Primary-backup
B. Source address based
C. Round robin
D. Load Sharing
Answer: A
There are three methods to implement implicit MEP:
First to Respond, in which the first Security Gateway to reply to the peer Security Gateway is chosen. An
organization would choose this option if, for example, the organization has two Security Gateways in a MEP configuration - one in London, the other in New York. It makes sense for VPN-1 peers located in England to try the London Security Gateway first and the NY Security Gateway second. Being geographically closer to VPN peers in England, the London Security Gateway is the first to respond, and becomes the entry point to the internal network. See: First to Respond.
Primary-Backup, in which one or multiple backup Security Gateways provide "high availability" for a primary Security Gateway. The remote peer is configured to work with the primary Security Gateway, but switches to the backup Security Gateway if the primary goes down. An organization might decide to use this configuration if it has two machines in a MEP environment, one of which is stronger than the other. It makes sense to configure the stronger machine as the primary. Or perhaps both machines are the same in terms of strength of performance, but one has a cheaper or faster connection to the Internet. In this case, the machine with the better Internet connection should be configured as the primary. See: Primary-Backup Security Gateways.
Load Distribution, in which the remote VPN peer randomly selects a Security Gateway with which to open a connection. For each IP source/destination address pair, a new Security Gateway is randomly selected. An organization might have a number of machines with equal performance abilities. In this case, it makes
sense to enable load distribution. The machines are used in a random and equal way. See: Random
Selection.
Reference: https://sc1.checkpoint.com/documents/R77/CP_R77_VPN_AdminGuide/13812.htm
QUESTION NO: 4
John detected high load on sync interface. Which is most recommended solution?
A. For short connections like http service – delay sync for 2 seconds
B. Add a second interface to handle sync traffic
C. For short connections like http service – do not sync
D. For short connections like icmp service – delay sync for 2 seconds
Answer: A
QUESTION NO: 5
What is the SOLR database for?
A. Used for full text search and enables powerful matching capabilities
B. Writes data to the database and full text search
C. Serves GUI responsible to transfer request to the DLEserver
D. Enables powerful matching capabilities and writes data to the database
Answer: A
QUESTION NO: 6
What is a feature that enables VPN connections to successfully maintain a private and secure VPN session without employing Stateful Inspection?
A. Stateful Mode
B. VPN Routing Mode
C. Wire Mode
D. Stateless Mode
Answer: C
Wire Mode is a VPN-1 NGX feature that enables VPN connections to successfully fail over, bypassing Security Gateway enforcement. This improves performance and reduces downtime. Based on a trusted source and destination, Wire Mode uses internal interfaces and VPN Communities to maintain a private and secure VPN session, without employing Stateful Inspection. Since Stateful Inspection no longer takes place, dynamicrouting protocols that do not survive state verification in non-Wire Mode configurations can now be deployed.
The VPN connection is no different from any other connections along a dedicated wire, thus the meaning of "Wire Mode".
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk30974
QUESTION NO: 7
On R80.10 the IPS Blade is managed by:
A. Threat Protection policy
B. Anti-Bot Blade
C. Threat Prevention policy
D. Layers on Firewall policy
Answer: A
Reference: https://www.checkpoint.com/downloads/product-related/r80.10-mgmt-architecture-overview.pdf
Download the newest Dumpsout 156-915.80 dumps from Dumpsout.com now! 100% Pass Guarantee!
156-915.80 PDF dumps & 156-915.80 VCE dumps: https://www.dumpsout.com/156-915.80-dumps.html (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!)
P.S. Free 156-915.80 Test dumps download from direct PDF Link: https://www.dumpsout.com/top/demo/Checkpoint-156-915.80.pdf
Topic: in 156-915.80 Braindumps, 156-915.80 Exam Dumps, 156-915.80 Exam Questions, 156-915.80 PDF Dumps, 156-915.80 Practice Tests, 156-915.80 questions answers. 156-915.80 Study Guide, 156-915.80 VCE Dumps, 156-915.80 PDF Braindumps
New Updated 156-915.80 Exam Questions from Dumpsout 156-915.80 PDF dumps! Welcome to download the newest Dumpsout 156-915.80 VCE dumps: https://www.dumpsout.com/156-915.80-dumps.html
Keywords: 156-915.80 exam dumps, 156-915.80 exam questions, 156-915.80 VCE , 156-915.80 VCE Dumps, 156-915.80 PDF dumps, 156-915.80 PDF Dumps Questions, 156-915.80 questions answers, 156-915.80 practice test, 156-915.80 study guide, 156-915.80 braindumps, 156-915.80 exam braindumps– 156-915.80 - Check Point Certified Security Expert Update - R80.10 Exam
P.S. Free 156-915.80 VCE dumps download from direct PDF Link: https://www.dumpsout.com/top/demo/Checkpoint-156-915.80.pdf
QUESTION NO: 1
Which command collects diagnostic data for analyzing customer setup remotely?
A. cpinfo
B. migrate export
C. sysinfo
D. cpview
Answer: A
CPInfo is an auto-updatable utility that collects diagnostics data on a customer's machine at the time of execution and uploads it to Check Point servers (it replaces the standalone cp_uploader utility for uploading files to Check Point servers).
The CPInfo output file allows analyzing customer setups from a remote location. Check Point support
engineers can open the CPInfo file in a demo mode, while viewing actual customer Security Policies and
Objects. This allows the in-depth analysis of customer's configuration and environment settings.
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk92739
QUESTION NO: 2
When deploying multiple clustered firewalls on the same subnet, what does the firewall administrator need to configure to prevent CCP broadcasts being sent to the wrong cluster?
A. Set the fwha_mac_magic_forward parameter in the $CPDIR/boot/modules/ha_boot. conf
B. Set the fwha_mac_magic parameter in the $FWDIR/boot/fwkern.conf file
C. Set the cluster global ID using the command “cphaconf cluster_id set <value>”
D. Set the cluster global ID using the command “fw ctt set cluster_id <value>”
Answer: C
Reference: https://supportcenter.checkpoint.com/supportcenter/portal? eventSubmit_doGoviewsolutiondetails=&solutionid=sk25977
QUESTION NO: 3
Which of these options is an implicit MEP option?
A. Primary-backup
B. Source address based
C. Round robin
D. Load Sharing
Answer: A
There are three methods to implement implicit MEP:
First to Respond, in which the first Security Gateway to reply to the peer Security Gateway is chosen. An
organization would choose this option if, for example, the organization has two Security Gateways in a MEP configuration - one in London, the other in New York. It makes sense for VPN-1 peers located in England to try the London Security Gateway first and the NY Security Gateway second. Being geographically closer to VPN peers in England, the London Security Gateway is the first to respond, and becomes the entry point to the internal network. See: First to Respond.
Primary-Backup, in which one or multiple backup Security Gateways provide "high availability" for a primary Security Gateway. The remote peer is configured to work with the primary Security Gateway, but switches to the backup Security Gateway if the primary goes down. An organization might decide to use this configuration if it has two machines in a MEP environment, one of which is stronger than the other. It makes sense to configure the stronger machine as the primary. Or perhaps both machines are the same in terms of strength of performance, but one has a cheaper or faster connection to the Internet. In this case, the machine with the better Internet connection should be configured as the primary. See: Primary-Backup Security Gateways.
Load Distribution, in which the remote VPN peer randomly selects a Security Gateway with which to open a connection. For each IP source/destination address pair, a new Security Gateway is randomly selected. An organization might have a number of machines with equal performance abilities. In this case, it makes
sense to enable load distribution. The machines are used in a random and equal way. See: Random
Selection.
Reference: https://sc1.checkpoint.com/documents/R77/CP_R77_VPN_AdminGuide/13812.htm
QUESTION NO: 4
John detected high load on sync interface. Which is most recommended solution?
A. For short connections like http service – delay sync for 2 seconds
B. Add a second interface to handle sync traffic
C. For short connections like http service – do not sync
D. For short connections like icmp service – delay sync for 2 seconds
Answer: A
QUESTION NO: 5
What is the SOLR database for?
A. Used for full text search and enables powerful matching capabilities
B. Writes data to the database and full text search
C. Serves GUI responsible to transfer request to the DLEserver
D. Enables powerful matching capabilities and writes data to the database
Answer: A
QUESTION NO: 6
What is a feature that enables VPN connections to successfully maintain a private and secure VPN session without employing Stateful Inspection?
A. Stateful Mode
B. VPN Routing Mode
C. Wire Mode
D. Stateless Mode
Answer: C
Wire Mode is a VPN-1 NGX feature that enables VPN connections to successfully fail over, bypassing Security Gateway enforcement. This improves performance and reduces downtime. Based on a trusted source and destination, Wire Mode uses internal interfaces and VPN Communities to maintain a private and secure VPN session, without employing Stateful Inspection. Since Stateful Inspection no longer takes place, dynamicrouting protocols that do not survive state verification in non-Wire Mode configurations can now be deployed.
The VPN connection is no different from any other connections along a dedicated wire, thus the meaning of "Wire Mode".
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk30974
QUESTION NO: 7
On R80.10 the IPS Blade is managed by:
A. Threat Protection policy
B. Anti-Bot Blade
C. Threat Prevention policy
D. Layers on Firewall policy
Answer: A
Reference: https://www.checkpoint.com/downloads/product-related/r80.10-mgmt-architecture-overview.pdf
Download the newest Dumpsout 156-915.80 dumps from Dumpsout.com now! 100% Pass Guarantee!
156-915.80 PDF dumps & 156-915.80 VCE dumps: https://www.dumpsout.com/156-915.80-dumps.html (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!)
P.S. Free 156-915.80 Test dumps download from direct PDF Link: https://www.dumpsout.com/top/demo/Checkpoint-156-915.80.pdf
Topic: in 156-915.80 Braindumps, 156-915.80 Exam Dumps, 156-915.80 Exam Questions, 156-915.80 PDF Dumps, 156-915.80 Practice Tests, 156-915.80 questions answers. 156-915.80 Study Guide, 156-915.80 VCE Dumps, 156-915.80 PDF Braindumps
Comments
Post a Comment